Cisco Cisco MeetingPlace Gateway SIM Anleitung Für Quick Setup

 in the 

 module 

 in the 

 module 

Proceed to the 

.  

Complete the following tasks, in the order shown, on each Cisco Unified Communications Manager 
node that is attached to a Cisco Unified MeetingPlace RSNA system. 

In this task, you connect the local Cisco Unified Communications Manager to each remote 
Cisco Unified MeetingPlace RSNA system.

Configure non-RSNA call-control for each Cisco Unified MeetingPlace system as described in the 

 module.

We recommend that you create a SIP trunk security profile in Cisco Unified 
Communications Manager specifically for Cisco Unified MeetingPlace. 

See 

 in the 

 module.

You perform this task in the Cisco Unified Communications Manager Administration pages. 
Because the pages and menus vary by release, you should check the Cisco Unified 
Communications Manager Administration online help for step-by-step instructions that are specific 
to your release.

Go to http://ccm-server/, where ccm-server is the fully-qualified domain name or IP address of the 
Cisco Unified Communications Manager server.

Log in with your Cisco Unified Communications Manager administrator username and password.

Select Device > Trunk.

Select Add New.