Cisco Cisco StadiumVision Mobile Wartungshandbuch
© 2011 Cisco Systems, Inc. All rights reserved.
Page 42 of 94
Enabling Auto Registration and Auto Provisioning in the Dashboard
By default, the auto registration and auto provisioning settings in SV Director are
disabled. To use these features, you need to enable them in the Management
Dashboard as follows.
disabled. To use these features, you need to enable them in the Management
Dashboard as follows.
4. Open the Management Dashboard and select Director Configuration > Auto
Registration Settings.
1. In the SV Director
Configuration Property panel, set the values to „true‟ for
Enable Auto Registration and Enable Auto Provisioning. Refer to Figure 41.
2. Click the save button.
Figure 41.
Enabling Auto Registration and Auto Provisioning in the Dashboard
Configuring the Default Video Channel
To verify video is working properly after a successful provisioning operation, set the
default Video Channel in the Management Dashboard.
default Video Channel in the Management Dashboard.
Figure 42.
Configuring the Default Video Channel