APRILIA quasar 125 Benutzerhandbuch
47
use and maintenance
Quasar 50 - 100 - 125 - 180
INSTALLING THE BATTERY
◆
Ensure the ignition switch is in the ""
position.
position.
◆
Remove the seat.
CAUTION
Place the battery
with the terminals pointing to the right side
of the vehicle.
of the vehicle.
◆
Refit the battery into its mount.
◆
Refit the battery retaining grommet (1).
WARNING
Upon reassembly, connect the positive
cable (+) first and then the negative
cable (-).
◆
Connect the positive (+) cable by
tightening the terminal screw.
tightening the terminal screw.
◆
Connect the negative (-) cable by
tightening the terminal screw.
tightening the terminal screw.
◆
Coat the terminals of cables and battery
with neutral grease or Vaseline.
with neutral grease or Vaseline.
◆
Refit the red protective cap (2).
◆
Refit the seat.
T R A N S M I S S I O N A I R F I L T E R
CAUTION
Clean the filter more frequently if the
vehicle is often used off-road. Unfiltered
dust is extremely harmful for the
mechanical parts.
Remove the transmission air filter,
proceed as follows:
◆
Remove the left footrest (3): loosen the 6
screws securing the footrest to the fairing
and the support screws (4).
screws securing the footrest to the fairing
and the support screws (4).
◆
Remove the ignition control lever (5).
◆
Remove the soundproofing guard (6) on
the left side by loosening the relevant
screws (7).
the left side by loosening the relevant
screws (7).
◆
Remove the screws (8).
◆
Remove the filter and use specific
detergents.
detergents.
◆
Let the filter dry and refit it into its seat.
50
100
8
4
4
3
7
5
7
6
2
1