APRILIA quasar 125 Benutzerhandbuch
49
use and maintenance
Quasar 50 - 100 - 125 - 180
To adjust the headlight beam:
◆
Loosen the two screws (1) securing the
headlight (2) to the relevant supports and
set beam direction.
headlight (2) to the relevant supports and
set beam direction.
◆
Once set to the required position, tighten
the screws (1).
the screws (1).
When finished:
WARNING
Check for correct beam vertical setting.
CHANGING THE HEADLIGHT BULB
To change the bulbs:
◆
Ensure the ignition switch is in the ""
position.
position.
◆
Loosen the five screws (2) and remove
the headlight from the front fairing.
the headlight from the front fairing.
◆
Slip off the bulb dust cover (5) with your
fingers.
fingers.
◆
Turn counter clockwise the bulb holder
(4) and detach it from headlight body (3).
(4) and detach it from headlight body (3).
◆
Remove the damaged bulb and fit a new
bulb of equal rating.
bulb of equal rating.
CAUTION
It is now necessary
to set the beam, see page 48 (VERTICAL
ADJUSTMENT OF THE HEADLIGHT
BEAM).
ADJUSTMENT OF THE HEADLIGHT
BEAM).
Remove the parking light as follows:
◆
Grasp the bulb holder (6) and pull to
extract.
extract.
◆
Remove the parking light bulb and fit a
new bulb of equal rating.
new bulb of equal rating.
125
180
50
100
5
4
6
3
1
2
2
2
2
2
2