HP dv6 Benutzerhandbuch

Power connector cable

603692-001

Before removing the power connector cable, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

Remove the battery (see 

), and then remove the following components:

a. Accessory cover (see 

)

b. Keyboard (see 

Top cover (see 

d. Display assembly (see 

)

Remove the power connector cable:

Disconnect the power cable (1) from the system board.

Release the power cable from the clips (2) built into the base enclosure.

Remove the Phillips PM2.5×4.0 screw (3) that secures the power connector to the base enclosure.

Remove the power connector bracket (4) The power connector bracket is included with the base

enclosure spare part kit, spare part number 603689-001.

74

Chapter 4   Removal and replacement procedures