HP dv6 Benutzerhandbuch

The system board spare part kit includes replacement thermal material.

For use on computer models equipped with a graphics subsystem with discrete memory and the
HD5650 chipset

603939-001

For use on computer models equipped with a graphics subsystem with discrete memory and the
HD5470 chipset

595133-001

For use on computer models equipped with a graphics subsystem with discrete memory and the
HD545V chipset

615906-001

For use on computer models equipped with a graphics subsystem with UMA memory

595135-001

Before removing the system board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

Remove the battery (see 

), and then remove the following components:

a. Hard drive (see 

b. Optical drive (see 

)

Keyboard (see 

d. Top cover (see 

e. Display assembly (see 

)

When replacing the system board, be sure that the following components are removed from the

defective system board and installed on the replacement system board:

●

RTC battery (see 

)

●

Memory modules (see 

)

●

)

●

Fan/heat sink assembly (see 

●

Processor (see 

)

Remove the system board:

Turn the base enclosure upside down, with the front toward you.

76

Chapter 4   Removal and replacement procedures