Sony ipela snc-rz25p Benutzerhandbuch

A

d

mini

s

tra

ting
 t

he 

Came

ra

Recording Images in Memory — Image memory setting Menu

52

When you click Image memory on the Advanced mode 
menu, the Image memory setting menu appears.
By using the image memory function, you can record the 
image and audio file, which has been shot being linked 
with the external sensor input or with the built-in motion 
detection function, to the built-in memory (about 8 MB) 
of the camera or CF memory card. The image file can 
also be recorded periodically.
You can also record a still image periodically.
The recorded image and audio files can be found or 
downloaded to the computer using the FTP server 
function. (See “Sending an Image via mail — e-Mail 
(SMTP) setting Menu” on page 46.)
Image memory setting menu is composed of three tabs 
Common, Alarm recording and Periodical recording.

• The image and audio files recorded in the built-in 

memory will be erased when the power of the camera 
is turned off.

• The frame rate and operability on the main viewer 

may decrease during image storage in the memory.

• When you remove the CF memory card or you turn off 

the camera with the CF memory card inside, set Easy 
memory function to OFF.

• Format the CF memory card in the computer before 

use.

Set whether you use the Image memory function or not. 
When you select On, the Common setting options are 

displays in the below. If you do not use it, select Off and 
click OK.

It displays the free spaces of the built-in memory you 
can write in at present.

It displays the free spaces of the CF memory card you 
can write in at present.

Select a memory in which you want to save an image.
Built-in memory: built-in memory of this camera 

(approximately 8 MB)

A-slot: CF memory card inserted into the slot in the 

front side of the camera

Select to overwrite the file or not when there is 
insufficient memory space to record the image.

Select On to send a warning mail to the Administrator 
when the built-in memory space is low or the memory is 
full.  Select Off if you do not want to send a warning 
mail.

When the Overwrite is set to On, a warning mail is not 
sent to the Administrator.

Type the name of the SMTP server you want to use for 
sending the warning mail, up to 64 characters.
Otherwise type the IP address of SMTP mail server.

Select the authentication required when you send an 
alarm mail.
Off: Select if no authentication is necessary when an e-

mail is sent.

On: When authentication is necessary an e-mail is sent, 

select one of the authentication methods from the 
followings.
SMTP: Select if authentication is necessary when an 

e-mail is sent.

POP before SMTP: Select when POP before SMTP 

authentication is necessary when an e-mail is 
sent.

When you set to On, be sure to select either or both 
SMTP or/and POP before SMTP.