Euro-Pro g6118 Benutzerhandbuch

Even if you have used a steam generator iron before, please read all instructions 
and safeguards in the Use and Care Instruction Book.  In addition, please note the 
following user tips:

: Steam performance improves after the first 6-8 hours of usage.  

The steam power increases and initial condensation at maximum 
temperature is reduced.

1.

Make sure the temperature setting of the iron is within the steam range on the 
temperature selector. 

2.

Turn power on for iron and steam generator.  Before starting to use steam, 
make sure the Steam Ready Light is “ON”, indicating that steam is available.

Trying to use steam before the Steam Ready Light is “ON” can cause water 

drops in the steam coming out of the iron.

3.  Clear the initial condensation by pressing the Steam Button up to 3 seconds. 

Repeat if necessary.

4.

While using the ironing system, if steam has not been released for more than 
approximately  5 minutes, the hose has cooled and any steam remaining in the 
hose from the last use might condense.  Clear this condensation by pressing 
Steam Button before proceeding to use the iron.

5. Replace the boiler filler cap and 

shake.

6. Remove the boiler filler cap and 

empty the tank. Rinse with water two 

to three times by filling, shaking and 

emptying again.

6. Wipe the outside of the steam 

generator base with a damp cloth.

3

1. We strongly recommend the use of 

demineralized/distilled water to 

ensure optimum performance and 

maximize the life of your steam 

generator. If you are using 

demineralized/distilled water, the 

steam generator should be cleaned 

once every six (6) to twelve (12) 

months. If you use regular tap water, 

the steam generator should be 

cleaned once a month.

2. Make sure that all the steam has 

been released from the steam 

generator before doing any cleaning 

or maintenance on the appliance. 

Follow instructions on page 7 for 

releasing the steam.

3. Remove the power cord from the 

electrical outlet and let the unit cool 

down for at least 4 hours after it has 

been used before starting to clean 

the steam generator.

4. NEVER immerse the iron or the 

steam generator in water or any 

other liquid.

1. Clean the steam generator iron 

ONLY when cold.

2. Do NOT use scouring pads,

abrasives or harsh cleansers.

3. Use a commercially sold soleplate 

cleanser following the manufacturers 

label instructions.

4. Use a soft damp cloth to wipe the 

outer shell of the iron.

5. Dry soleplate and iron thoroughly 

after cleaning.

1. Make sure that there is no steam 

remaining in the steam generator.

2. Make sure that the steam generator is 

completely cold.

3. Remove the boiler filler cap by slowly 

turning counter clockwise to allow any 

remaining steam to escape.

4. Fill water  tank with a solution of 20% 

vinegar and 80% water (5 oz vinegar 

and 21 oz of water) and let sit 

overnight (8-12 hours).

1. Ensure that the seam generator is 

depressurized by opening the steam 

button on the iron until no further 

steam is escaping.

2. Always unplug the power cord from 

the electrical outlet when not in use.

3. Always store in a dry place away 

from the reach of children.

4. Always drain the water tank before 

storing.

5. Always let your steam generator cool 

completely before storing.

6. Do not let power cord and steam 

hose to touch hot surfaces.

7. Wrap the power cord and steam 

hose around the appliance loosely.

8