Euro-Pro g6118 Benutzerhandbuch

Instructions for specific iron 

temperature settings should be 

treated as guidelines only. We 

recommend that you test each type 

of fabric on an inside seam before 

proceeding to iron the garment. The 

steam generator iron can produce 

humid steam at relatively low 

temperature settings where regular 

household irons would release 

water. At the same time, the very dry 

steam produced at the high iron 

temperature setting “•••” can be used 

on some fabrics where normally the 

use of steam is prohibited.

Your Steam Generator Iron features 

a professional type iron with steam 

holes placed in the front of the iron 

soleplate. Correct ironing procedure 

involves steaming the fabric with the 

front end of the iron followed by 

pressing and drying with heat from 

the rear of the iron. For best results, 

garments should be dry after 

pressing to avoid re-wrinkling due to 

lingering dampness. Therefore, we 

recommend that you use the steam 

as required, but not continually.

While your Steam Generator Iron 

offers high quality type professional 

type steam, some fabrics may 

require additional moisture for best 

results. You may want to press 

cotton shirts while still damp or spray 

with water prior to ironing.

1. Press the steam generator On/Off 

button to the “OFF” position. 

2. Release all the remaining steam in 

the steam generator by pressing the 

steam button until no more steam is 

coming out from the iron.

3. Unplug the appliance from the wall 

outlet. Allow it to cool for a minimum 

of 5 minutes.

4. To unscrew the boiler filler cap, push 

down and turn counter clockwise 

slowly. If any steam continues to 

escape, STOP and release the 

steam through the iron as in the 

steps above.

5. Using a measuring cup, fill the water 

tank with 26 US fl. oz. 

6. Replace the boiler filler cap turning 

clockwise until you get friction. DO 

In a steam generator iron the steam 

is produced in the generator and not 

in the iron as with regular household 

irons. The temperature of the iron 

determines the type of steam – dry 

or humid. At high temperatures, the 

iron delivers very dry steam. Lower 

temperature settings offer humid 

steam.

For best pressing results, you have 

the flexibility to select the type of 

steam and not only the iron 

temperature. A balance should be 

maintained between the humidity 

(low iron temperature) required to 

loosen fibers and the need for heat 

(higher iron temperatures) to 

flatten/shape and dry the fibers.

1. Boiler Filler Cap

2. Steam Ready Light (green)

3. On/Off Button (red)

4. Steam Generator Base

5. Iron Rest Plate

6. Power Cord

7. Steam Hose

8. Steam Button

9. Temperature Ready Light

10. Temperature Control Dial

11. Stainless Steel Soleplate

Voltage:

120V.,  60Hz.

Power:

1500 Watts

Water Capacity:   

26 US fl. Oz.

Working Pressure:

2.9 bar

7