Trimble Outdoors 58052-00 Benutzerhandbuch
Copernicus GPS Receiver 1 9 9
TRIMBLE ASCII INTERFACE PROTOCOL (TAIP) B
PT Port
Characteristic
This message defines the characteristics for the TAIP port.
Data String Format:
AAAA,B,C,D
Most TAIP using receivers use the following default port characteristics
•
4800 baud
•
8 data bits
•
1 stop bit
•
No parity
Note –
The characteristics set by this message will be stored in the receiver’s battery
backed
ram. The Lassen iQ receiver family of receivers do not include an internal battery but
provide a battery back-up input line that may be used to retain memory when main
power is removed.
provide a battery back-up input line that may be used to retain memory when main
power is removed.
If you do not use battery back-up, all port characteristics will reset to either the
default settings after power is removed, or to the settings previously stored in Flash.
default settings after power is removed, or to the settings previously stored in Flash.
The PT command uses commas between data fields.
Item
# of Char
Units
Format
Value
Baud Rate
4
n/a
AAAA
4800 - 4800 bps
9600 - 9600 bps
1920 - 19200 bps
3840 - 38400 bps
5760 - 57600 bps
1152 - 115200 bps
# of data bits
1
n/a
B
# of stop bits
1
n/a
C
1
Parity
1
n/a
D
“N” = None
Total number of characters is 10 (includes commas)