cortech datalog 3 Benutzerhandbuch
Datalog 3 User Manual - Page 48 of 66
CORTECH DEVELOPMENTS LTD
Overtype with the new hours
3.
Repeat steps 1 and 2 for minutes and seconds digits
Alarm Database Report Event Field
The Events field allows the operator to select the type of events to report, from a list.
The options are:
Alarm Events
Select this option if just alarm event information is required. Additionally, in the
Alarm Event check boxes, the operator can choose whether to include: Normal
Alarms, Tamper Alarms, Fire Alarms, Pre-Alarms, Alarm Contact Open/Closed
times, Soak Test Alarms, and to include reset Cause information
Alarm Event check boxes, the operator can choose whether to include: Normal
Alarms, Tamper Alarms, Fire Alarms, Pre-Alarms, Alarm Contact Open/Closed
times, Soak Test Alarms, and to include reset Cause information
Faults and Warnings Displays any fault alarms and warning messages that have occurred for the
period selected.
Inhibit Events
Displays any inhibit operations for the period. The ‘User’ field allows viewing
inhibits by all users or a specific user. The default is for all zones but clicking on
the All Zones check box will remove the tick and one or more zones can be
selected by typing in the field below the check box.
inhibits by all users or a specific user. The default is for all zones but clicking on
the All Zones check box will remove the tick and one or more zones can be
selected by typing in the field below the check box.
Disables & Soaks
Displays any Engineering disable or soak test operations that have occurred for
the period. The ‘User’ field allows viewing inhibits by all users or a specific user.
The default is for all zones but clicking on the All Zones check box will remove
the tick and one or more zones can be selected by typing in the field below the
check box.
the period. The ‘User’ field allows viewing inhibits by all users or a specific user.
The default is for all zones but clicking on the All Zones check box will remove
the tick and one or more zones can be selected by typing in the field below the
check box.
System Events
Displays information on any changes that take place on the system such as
password edits, Time Zone start and end messages, Program termination. The
‘User’ field allows viewing events caused by all users or a specific user.
password edits, Time Zone start and end messages, Program termination. The
‘User’ field allows viewing events caused by all users or a specific user.
All Events
Displays all events for the selected period.
Alarm Database Report User Field
If the Event field is set for either Inhibit Events, Disable and Soak Test events or System Events, then
the User field is enabled. The operator can then choose either to display the events that involved all
users (the default) or select a Users name from the list. The displayed report will then only display the
events that occurred while that user was logged on.
the User field is enabled. The operator can then choose either to display the events that involved all
users (the default) or select a Users name from the list. The displayed report will then only display the
events that occurred while that user was logged on.
Alarm Database Report Alarm Event
This option allows the operator to choose the type of alarms to display on the History Database report
If the Event field has been set to ‘Alarm Events’, the Alarm Event check boxes are enabled. The
operator can then tick the type of alarms to be displayed. The options are: Normal Alarms, Tamper
Alarms, Fire Alarms, Pre-Alarms, Alarm Contact Open/Closed times, and Soak Test Alarms.
operator can then tick the type of alarms to be displayed. The options are: Normal Alarms, Tamper
Alarms, Fire Alarms, Pre-Alarms, Alarm Contact Open/Closed times, and Soak Test Alarms.
The last check box, ‘Include Reset Causes’, enables reset information to be displayed with the cause. If
this box is not checked the report will only display when alarms were activated and not when they were
reset.
this box is not checked the report will only display when alarms were activated and not when they were
reset.
Alarm Database Report Options Field
This check box is enabled when the Events field is set to display ‘Inhibit Events’. The default is that this
check box is ticked and when the report is run for ‘Inhibit Events’ both single zone and group inhibit
changes are shown. If the operator clicks on the check box to remove the tick, the report, when run, will
show only single zone inhibits and not group inhibits.
check box is ticked and when the report is run for ‘Inhibit Events’ both single zone and group inhibit
changes are shown. If the operator clicks on the check box to remove the tick, the report, when run, will
show only single zone inhibits and not group inhibits.