Lennox gas stove Benutzerhandbuch

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

Installation

nstalling

oor

rim

pring

andle

CAUTION: Always ensure that plated surfaces are clean

and free of fingerprints before lighting stove. Fingerprints

will leave permanent blemishes if left on plated surface

when lit. When installation is complete, the trim should

be gently cleaned with a soft cloth and either alcohol or

glass cleaner. Do not overtighten nuts, overtightening can

create visible dimples on the plated surface.

To install the trim on the door, first see Opening and Remov-

ing Door on page 22. Slide the threaded studs on the trim

through the holes in the door. Install the nuts on the studs

to secure the trim to the door. Do not over tighten the nuts

or they will snap the studs off. To install the spring handle,

first close the door and screw the handle into the receiving

nut. Then spray Windex or water on the shaft of the handle

to act as a lubricant. Next, twist the spring handle counter-

clockwise onto the shaft. Use Windex or alcohol to remove

any fingerprints prior to firing the stove.