Lennox gas stove Benutzerhandbuch

7. Place the left log on burner supports with the charred

surface facing up. The left log will only fit on the burner

supports in one direction.

8. Place  embers  around  the  perimeter  of  the  burner  and

sparingly in field of burner. Do not block air holes on the

burner.

Caution: If the logs are not properly installed, your stove

will not function correctly.

Parts list:  rear log, right log, left log, center log, brick panel

(packaged separately)

1. Remove the logs from the box and carefully unwrap them.

The logs are fragile, so handle them with care.

2. Remove the brick retainer bracket from the upper left

corner inside the stove.

Log Inserts

5. Place rockwool over ports. Rockwool can be placed to

obscure air holes, but do not cover the air holes.

6. The right front log (positioned with the black charred

surface toward the front) should be placed on the peg

protruding from the right side of the stove.

Right Log

Embers

Left Log

9. Set center log on support with charred surface toward

you and rest against the rear log.

Brick

Retainer

3. Install  the  brick  panel  and  replace  the  brick  retainer

bracket.

4. Place the rear log on the back log supports. The charred

surface of the log should face the front.