bobcat 2200d Benutzerhandbuch

The accelerator pedal (1) is the pedal on the right
[Figure 3].

With the engine running and the Forward/Reverse handle
in the FORWARD or REVERSE position, vehicle speed
will increase as the accelerator pedal is pressed. When
the accelerator pedal is released, it will return to the
original position and the engine will idle. See WARNING
and CAUTION on page 3.

The brake pedal (2) is located to the immediate left of the
accelerator pedal [Figure 3]. To slow or stop the vehicle,
press the brake pedal.

The park brake pedal (3) is located to the left of the brake
pedal  [Figure 3]. To engage the park brake, first apply
pressure to the brake pedal, then firmly press the park
brake pedal until it latches into place. To disengage, pull
the park brake release handle [Figure 4]. See following
WARNING.

The low oil warning light (8) is located on the instrument
panel just to the left of the steering column [Figure 2]. If
the warning light comes on, oil should be checked and
added to the engine as necessary before continuing to
use the vehicle. The vehicle should never be driven when
the low oil warning light remains on. If the warning light
goes on and off, the vehicle may be driven, but oil should
be added at the first opportunity. If the oil level is correct
and the warning light stays on, have a trained technician
check the vehicle. See following CAUTION.

1

2

3

4

P

P

P