bobcat 2200d Benutzerhandbuch

The electric bed lift switch (1) is located on the instrument
panel to the right of the key switch [Figure 2]. To lift the
bed, pull up and hold the toggle switch in the upper
position. Release switch to stop lifting operation. To close
the bed, press down and hold switch in the lower position.
The bed lift will make a loud clicking sound to signal the
bed is in the rest position. 

The headlamp/taillamp and side position lamp control
switch (5) is located to the left of the steering column
[Figure 2]. Press the switch to the right to turn all lamps
on. Press the switch to the left to turn side position lamps
on only. Return the switch to the middle position to turn
the lamps off. 

The brake lamps illuminate when the brake pedal is
pressed. When the park brake is engaged, the brake
lamps will turn off. See following NOTE.

There are two turn signal indicator lights (3) on the
instrument panel [Figure 2]. The upper symbol indicates
the turn direction for the vehicle; the lower symbol
indicates the turn direction for an attached trailer.

The turn signal control (1) is mounted on the steering
column  [Figure 5]. Move the handle up to indicate a
right-hand turn. Move the handle down to indicate a left-
hand turn. Return the handle to the center position after
completing a turn.

The hazard lamp switch (2) is located behind the turn
signal handle [Figure 5]. To activate the hazard lamps,
make sure that the turn signal handle is in the center (off)
position, then pull the switch marked "HAZARD" until it is
locked in place. To deactivate the hazard lamps, move
the turn signal handle in either direction and return it to
the center position. 

The horn button (3) is located on the end of the turn
signal handle [Figure 5]. Press the button in to sound the
horn.

3

1

2