Dimplex dfb6016 Benutzerhandbuch

12  

www.dimplex.com

pressed.  
The fireplace can be turned off 

at any point by pressing the OFF 

button on the remote control 

transmitter.

:  The flame effect 

is turned on and the first red 

indicator light illuminates.

Level 2  :  The flame effect 

remains on, the heater is 

activated to the low heat 

setting, and the first and 

second red indicator lights 

illuminate.

Level 3  :  The flame effect 

remains on, the heater is set 

to the high heat setting, and all 

initialize your fireplace for the 

first time.  This procedure is also 

required every time there is a loss 

of power to the remote control in 

the fireplace (I.E. power failure, 

breaker tripped, main power 

switch is turned off).

Ensure that power is supplied 

1. 

through the main service 

panel.
Access the manual controls, 

2. 

(remove glass doors or pull 

grill down if applicable) pull 

the right side steel curtain 

to the outside of the unit (if 

applicable).
Locate manual controls.

3. 

Activate main power switch.

4. 

Press and hold the on switch 

5. 

marked “ 

 

 ” for five (5) 

seconds (red indicator light 

will flash).
Press the on button located 

6. 

on the remote control 

transmitter.

This will synchronize the remote 

control transmitter and receiver.
Remote Control Usage
The remote control operates the 

fireplace levels sequentially.  The 

level is increased every time the 

ON button on the transmitter is 

ON 

Button

Battery 

Cover

 

 

OFF

Button

Battery