Dimplex dfb6016 Benutzerhandbuch

10  

www.dimplex.com

make sure the unit’s main 

1. 

on/off switch is switched off 

(refer to operating instruction 

section).
Plug the unit into a 15 

2. 

Amp/120 Volt outlet.  If the 

cord does not reach, you may 

use an extension cord rated 

for a minimum of 1875 Watts.
Push the fireplace into the 

3. 

opening being careful not 

to damage the base of the 

mantel or cabinet so that 

the fireplace is flush with the 

mantel or cabinet.

Level the unit with shims if 

4. 

necessary (not provided).
Install the trim onto the 

5. 

fireplace (refer to trim 

installation instructions).

 WARNINg:  Ensure the 

power cord is not installed so 

that it is pinched or against a 

sharp edge and ensure that 

the power cord is stored or 

secured to avoid tripping or 

snagging to reduce the risk of 

fire, electric shock or injury to 

persons.

A

C

B

D

A.  Manual On/Off Switch
The fireplace has a manual 

power on/off switch located on 

the control panel of the fireplace.  

Toggle the switch to turn the 

fireplace on and off.

Turn the flame brightness control 

knob to increase or decrease 

the brightness of the flame and 

embers.