Dimplex dfb6016 Benutzerhandbuch

8  

www.dimplex.com

restrict air circulation.  If 

installing the fireplace in a 

carpeted area, place a one-

piece, solid, flat surface under 

the fireplace insert.  Ensure 

that all four of the insert’s feet 

rest securely on this surface.

Seal all drafts and vents 

1. 

with non-fibrous insulation 

materials to prevent chimney 

debris from falling into the 

fireplace insert.  Do not install 

into an existing fireplace 

that is prone to leaks or 

dampness.
Cap the top of the chimney 

2. 

flue to prevent rain from 

entering.

Plan your electrical power 

3. 

supply (refer to noTE 1).
The power cord can run along 

4. 

the front of the hearth to an 

outlet near the fireplace.

 WARNINg:  To prevent 

personal injury you should 

hire a professional to cap the 

chimney flue or cut a hole 

in the existing fireplace for 

wiring.  If you return your 

existing fireplace to its original 

use (example:  wood burning), 

it should be inspected by the 

local building department prior 

to use to reduce the risk of fire 

and personal injury.

select a suitable location that 

1. 

is not susceptible to moisture 

and is away from drapes, 

furniture and high traffic.
Place the fireplace in the 

2. 

desired location to see how it 

will look in the room.
mark the desired location 

3. 

on the floor and store the 

fireplace in a safe, dry and 

dust free location.
Use studs to frame an 

4. 

opening of 30 ¾ inch (78.1 

cm) wide X 25 ¾ inch (65.4 

Air Circulation Areas

Rubber

Feet

25 ½”

(64.8 cm)

30 ¼”

(76.8 cm)

11 ½”

(29.2 cm)