Bakers Pride chs-2n Benutzerhandbuch

 

9

 
 
The Front Curved glass and Side glass panels can be removed for maintenance or 
cleaning as follows: 
 
 
CURVED GLASS 
 

•  Lift front curved glass section forwards from the top. 

(The front glass section is attached to the cabinet at the bottom by the aluminium 
strip). 

      Hold the glass in the forward position for cleaning or tilt forwards and lift out of  
      track for complete removal 
 
IMPORTANT:- Do not leave the front curved glass section unsupported in the 
open position. 
 

•  Slide the side panels our from the front 

•  Replace in reverse order 

The “Hot Shop” display cabinets are illuminated with T5  Fluorescent lamps fitted 
with a protective over tube. 
 
Replace failed lamps as soon as possible as follows:- 
 

•  Remove any food items from the cabinet, then switch “off”. 

•  Disconnect the cabinet from the power supply, allow to cool. 

•  Remove sliding doors. 
•  Remove mezzanine shelf and any food pans. 

•  Remove lamp, grip lamp through lamp cover & twist ¼ turn clockwise towards 

front of cabinet to release ends.  

•  Replace with a new lamp of the correct voltage and rated input.  

 

 

 

Important:-  Do Not forget to refit lamp cover. Replace cover if damaged. 
 
 

Important:-  In the event of a glass breaking whilst the 
 

    cabinet is in use, any food items held at that time must 

 

 

    be wasted. 

 
The cabinet must be thoroughly inspected and cleaned before future use.