Garmin Forerunner 935 Benutzeranleitung

Select Settings > Activities & Apps.

Select an activity.
NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Climb > Status > On.

Select an option:
• Select Run Screen to identify which data screen appears 

while running.

• Select Climb Screen to identify which data screen 

appears while climbing.

• Select Invert Colors to reverse the display colors when 

changing modes.

• Select Vertical Speed to set the rate of ascent over time.
• Select Mode Switch to set how quickly the device 

changes modes.

You can set 3D speed and distance to calculate your speed or 

distance using both your elevation change and your horizontal 

movement over ground. You can use it during activities such as 

skiing, climbing, navigating, hiking, running, or biking.

You can use the auto scroll feature to cycle through all of the 

activity data screens automatically while the timer is running.

Hold  .

Select Settings > Activities & Apps.

Select an activity.
NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Scroll.

Select a display speed.

By default, the device uses GPS to locate satellites. For 

increased performance in challenging environments and faster 

GPS position location, you can enable GPS + GLONASS. Using 

GPS + GLONASS reduces battery life more than using only 

GPS. Using the UltraTrac option records track points and sensor 

data less frequently (

).

Hold  .

Select Settings > Activities & Apps.

Select the activity to customize.

Select the activity settings.

Select GPS, and select an option.

The UltraTrac feature is a GPS setting that records track points 

and sensor data less frequently. Enabling the UltraTrac feature 

increases battery life but decreases the quality of recorded 

activities. You should use the UltraTrac feature for activities that 

demand longer battery life and for which frequent sensor data 

updates are less important.

The timeout settings affect how long your device stays in 

training mode, for example, when you are waiting for a race to 

start. Hold  , select Settings > Activities & Apps, select an 

activity, and select the activity settings. Select Power Save 

Timeout to adjust the timeout settings for the activity.
Normal: Sets the device to enter low-power watch mode after 5 

minutes of inactivity.

Extended: Sets the device to enter low-power watch mode after 

25 minutes of inactivity. The extended mode can result in 

shorter battery life between charges.

Hold  .

Select Settings > Activities & Apps.

Select an activity.

Select an option:
• To remove an activity from your list of favorites, select 

Remove from Favorites.

• To delete the activity from the apps list, select Remove.

Hold  , and select Settings > GroupTrack.
Show on Map: Enables you to view connections on the map 

screen during a GroupTrack session.

Activity Types: Allows you to select which activity types appear 

on the map screen during a GroupTrack session.

You can customize the appearance of the watch face by 

selecting the layout, colors, and additional data. You can also 

download custom watch faces from the Connect IQ store.

Before you can activate a Connect IQ watch face, you must 

install a watch face from the Connect IQ store (

).

You can customize the watch face information and appearance, 

or activate an installed Connect IQ watch face.

From the watch face, hold  .

Select Watch Face.

Select UP or DOWN to preview the watch face options.

Select Add New to scroll through additional pre-loaded watch 

faces.

Select START > Apply to activate a pre-loaded watch face or 

an installed Connect IQ watch face.

If using a pre-loaded watch face, select START > 

Customize.

Select an option:
• To change the style of the numbers for the analog watch 

face, select Dial.

• To change the style of the hands for the analog watch 

face, select Hands.

• To change the style of the numbers for the digital watch 

face, select Layout

• To change the style of the seconds for the digital watch 

face, select Seconds.

• To change the data that appears on the watch face, select 

Additional Data.

• To add or change an accent color for the watch face, 

select Accent Color.

• To change the background color, select Bkgd. Color.
• To save the changes, select Done.

Hold  , and select Settings > System.
Language: Sets the language displayed on the device.
Time: Adjusts the time settings (

).

Backlight: Adjusts the backlight settings (

).

Sounds: Sets the device sounds, such as key tones, alerts, and 

vibrations.

Do Not Disturb: Turns on or off do not disturb mode. Use the 

Sleep Time option to turn on do not disturb mode 

24

Customizing Your Device