Goliath Solutions SPIDER-10-001 Benutzerhandbuch
FSM Cable Installation & MEU Activation
Page 5 of 43 Rev. 1A, Rev. Date: 8/31/2006
Use or Disclosure of this document is covered under the Non-Disclosure Agreement executed between the
prospective vendor and Goliath Solutions LLC.
Prior to Installation:
Prior to your installation visit the Goliath Solutions Help Desk and the Cable Installation
Vendor will have scheduled the installation with the Retailer. Your responsibility prior to the
installation is the following tasks:
1. Print a copy of the Pre-Installation Survey from QuickBase. A sample report is found
in Appendix G.
2. Review the Pre-Installation Survey.
3. If the store has an exception floor plan, print and review that floor plan.
4. If the store has a standard floor plan the store floor plans are listed in Appendix G –
Store Layouts in the Cable Installation & MEU Activation Manual.
5. Print a current copy of the Campaign List for the tags to be installed at the store.
6. Go to SYSMON and verify if Test Tags have been entered for the store. If test tags are
installed in the store print this information. (You will need this to verify if the test tags
are still present in the store.) If test tags are installed in the store go to step 9.
are still present in the store.) If test tags are installed in the store go to step 9.
7. Prepare 18 RFID Test tags with batteries for the store. As you prepare the test tags
record the tag information in the Test Tag Inventory Sheet. (This is found in Appendix
D of this document.) 11 RFID test tags will be used in the store and 7 RFID test tags
will be used in the stock room.
D of this document.) 11 RFID test tags will be used in the store and 7 RFID test tags
will be used in the stock room.
8. Enter the test tag information into SYSMON.
9. A store will initially have about 30 active campaigns that we are tracking. Make sure
that you have enough of the following items for the store for these campaigns:
a) RFID Tags
b) Batteries
c) Tag envelopes
d) Goliath Tag Installation Report (This is found in Appendix E of this document.)
a) RFID Tags
b) Batteries
c) Tag envelopes
d) Goliath Tag Installation Report (This is found in Appendix E of this document.)
10. Always have extra RFID Tags, Batteries and Tag envelopes with you.
11. Verify that you have the equipment listed in Appendix A of this manual.