Baumer Electric AG OIS-W-WR300303 Benutzerhandbuch
Baumer Ident AG
28 / 29
Author: Clemens Zehnder
File: Maintenance-SW.doc Version 3.0 e
Advice!
If you want to use the digital outputs, please follow the table 4-10. To set the parameters for the time function in
the chosen operating mode, please follow also the table 4-10. We gladly advise you on defining the parameters.
the chosen operating mode, please follow also the table 4-10. We gladly advise you on defining the parameters.
Auxmode1 / Auxmode2
There are four ways for the digital output to forward a valid identification:
•
Auxmode=0 transparent
•
Auxmode=1 filtered
This filter function decides whether the current code N is unequal to the code N-1. In combination with
the time constant Tauxf it is possible to define the duration after which the same code can set the
digital output again without a different tag (T) having passed the identification point in the meantime.
This filter function decides whether the current code N is unequal to the code N-1. In combination with
the time constant Tauxf it is possible to define the duration after which the same code can set the
digital output again without a different tag (T) having passed the identification point in the meantime.
•
Auxmode=2 Host
triggered
A higher-order system controls the digital output via telegram.
•
Auxmode=3 ID
acknowledge
If you use only one antenna (Reader settings: Ant=1 or Ant=2) then you have the possibility to indicate
when the host answers the data telegram. The answer telegram is called acknowledge telegram.
when the host answers the data telegram. The answer telegram is called acknowledge telegram.
Auxfunct1 / Auxfunct2
There are two different timer functions for the digital outputs:
•
Auxfunct=0 Impulse
•
Auxfunct=1
Delayed turn-off
Tdon1 / Tdon2
This parameter defines the ON delay of the chosen timer function.
Tdoff1 / Tdoff2
This parameter defines the impulse duration (Auxfunct=0) or the OFF delay (Auxfunct=1).
Tauxf1 / Tauxf2
This parameter defines the time constant of the function „Auxmode“.
Auxinv1 / Auxinv2
The output can be inverted.
Ant
Auxmode1
Auxmode2
1
1 or 2
3
2
3
1 or 2
Table 4-5: ID acknowledge
Using only Ant1:
When the acknowledge arrives within the duration specified
by the parameter ID_Msg_Timeout, then the digital output
AUX_OUT2 will be „ON“ for the duration specified by the
parameter Tdoff2.
Using only Ant2:
When the acknowledge arrives within the duration specified
by the parameter ID_Msg_Timeout, then the digital output
AUX_OUT1 will be „ON“ for the duration specified by the
parameter Tdoff1.
When the acknowledge arrives within the duration specified
by the parameter ID_Msg_Timeout, then the digital output
AUX_OUT2 will be „ON“ for the duration specified by the
parameter Tdoff2.
Using only Ant2:
When the acknowledge arrives within the duration specified
by the parameter ID_Msg_Timeout, then the digital output
AUX_OUT1 will be „ON“ for the duration specified by the
parameter Tdoff1.