drakesystem co. ltd DSCAR001 Benutzerhandbuch
it sends the signal to the remote controller to alert this status to the user.
Now the user can recognize the triggering by the remote controller shows
15 times of green, red LED and “CRICKET” sound. The siren and light can be removed
by pressing any button of remote controller.
15 times of green, red LED and “CRICKET” sound. The siren and light can be removed
by pressing any button of remote controller.
2-13. COMMUNICATION
ERROR
Sometimes you can see 3 times red LED flashing and dual beeps
when you press any button of the remote controller.
This means that the remote controller has communication error.
The communication error can be happened following reasons.
when you press any button of the remote controller.
This means that the remote controller has communication error.
The communication error can be happened following reasons.
2-13-1. The car is in out of range.
2-13-2. You pressed wrong button for an operation.
2-13-3. There maybe exist a RF interference, which can cause communication error.
2-13-4. Some part of car alarm system has problem itself.
2-13-5. Your remote controller battery would be worn out.
2-13-2. You pressed wrong button for an operation.
2-13-3. There maybe exist a RF interference, which can cause communication error.
2-13-4. Some part of car alarm system has problem itself.
2-13-5. Your remote controller battery would be worn out.
2-14. REPLACEMENT OF CAR BATTERY
When you replace the car battery after installation of car alarm system,
the car will treats it as an intruding into the car. So, the car alerts with light flashing and
siren for 45 seconds. And, the remote controller shows 15 times
of LED flashing with “CRICKET” sounds.
After the alarm, the car returns to the arming.
the car will treats it as an intruding into the car. So, the car alerts with light flashing and
siren for 45 seconds. And, the remote controller shows 15 times
of LED flashing with “CRICKET” sounds.
After the alarm, the car returns to the arming.
2-15. REPLACEMENT OF BATTERY IN REMOTE
When the remote controller battery is worn out, the remote controller shows alert
message with 2 times of red LED and quadruple beep.
You should replace the battery when you hear this alert.
The car alarm system may operate improperly when you use it without replacing battery.
message with 2 times of red LED and quadruple beep.
You should replace the battery when you hear this alert.
The car alarm system may operate improperly when you use it without replacing battery.
2-16. SECOND
CAR
The remote controller has a special function.
This toggle function offers you can control your 2
This toggle function offers you can control your 2
nd
car by same remote controller. You
can select your car by pressing the button “LOCK” & “ASTERISK”
simultaneously for more than 2 seconds.
You can hear one long beep or 2 long beeps by pressing the buttons.
One long beep means that the remote controller will control your current (primary) car and
two long beeps mean that the remote controller is set for your 2
simultaneously for more than 2 seconds.
You can hear one long beep or 2 long beeps by pressing the buttons.
One long beep means that the remote controller will control your current (primary) car and
two long beeps mean that the remote controller is set for your 2
nd
car.
All the functions of remote controller for the second car are exactly same.
But you should know that you cannot control your both cars at the same time.
But you should know that you cannot control your both cars at the same time.
2-17. DESCRIPTION OF HARNESS ASSY
1). RED : RED wire consists with the 15 amp fuse.
This wire would be connected to the vehicle’s positive battery terminal
or a constant positive +12V power supply.
2). BROWN : BROWN wire would be connected with the (+) wire of siren.
And black wire of siren should be connected to ground.
For corrosion resistance, the black wire of siren would be connected inside
the vehicle under the dash board.