Zebra Technologies Corporation WMC63000902 Benutzerhandbuch
WMC6300 Windows 2000 User’s Guide
Removing the WMC6300 Wireless Modem Card
The WMC6300 should be ejected using the following procedure to ensure that
power to the card is disabled prior to removal.
power to the card is disabled prior to removal.
Warning
Always eject card when not in use.
1.
2.
Click on the Unplug or Eject Hardware icon in the system task bar.
Select
“
Stop mea PC Card” from the popup menu as shown in Figure 16.
Figure 16.
Eject the Hardware
3. Wait for a message that indicates that the device may be safely removed
Figure 17.
Safe to Remove the WMC6300 Card
4. Remove the WMC6300 from the PCMCIA slot with the Antenna attached
to the WMC6300 as shown in Figure 18.
to the WMC6300 as shown in Figure 18.
Figure 18.
Removing the WMC6300 from the PCMCIA slot
5. Remove the Antenna from the Antenna Clip and store the WMC6300 with
the Antenna attached for future use. The Antenna Clip remains attached to
the computer.
the Antenna attached for future use. The Antenna Clip remains attached to
the computer.
Note: Should the Antenna Clip become unusable or if additional Antenna
Clips are required, the Antenna Clips are available by ordering
MeshNetworks Part Number
Clips are required, the Antenna Clips are available by ordering
MeshNetworks Part Number
MEA–AntennaClip.
13