Sea Air and Land Communications 12865 Benutzerhandbuch

     

   

   SEA AIR & LAND COMMUNICATIONS LTD, CHRISTCHURCH, NEW ZEALAND

SALCOM 12-86-5000 Miniature Paging Transmitter PCB

ISSUE: 12865000UC 0714 

Sea Air and Land Communications Ltd

Page 1

The 12-86-5000 is a small, high specification, low cost Paging transmitter PCB
measuring 60mm by 31mm and only 6mm deep with battery fitted.  

The 12-86-5000 has been tested and type approved as a bare PCB, allowing an  easy
route to compliance for OEM’s

The 12-86 range of products are POCSAG direct to pager transmitters, allowing low
cost systems to be developed since intermediate receivers and transmitters are not
required for short range applications.

12-86 transmitters support up to 5 inputs, each of which can be programmed with up
to a 35 character message. 

Programming can either with a serial programming cable that can be purchased
separately or preprogrammed when supplied.

A “Flash and Cancel” feature allows the 12-86-5000 to be programmed to flash the red
LED for a period of time after each transmission.  This allows the originating
transmission source to be easily identified.

Although the 12-86 is a low power transmitter, a direct line of sight transmission range
of up to 200 metres can be expected.  Transmit range within buildings is reduced, but
still considerable having proven to be effective in some cases between floors and
across buildings.  

Pressing any button will result in the POCSAG transmission of a pre-programmed
message assigned to that button. The red transmit LED will illuminate for the duration
of the transmission.

The red transmit LED can also be used as an indication of battery health, and should
the LED be dim or fail to light, the CR2032 button cell should be replaced.