HID Global Corporation 4045 Benutzerhandbuch

 

ENTRYPROX – 4045-907  REV A 

28 

PIN codes and card numbers can be programmed manually 
via the keypad.  Cards can also be programmed by 
presentation to the reader at the correct point in the 
command sequence. 
 
When adding or modifying PIN codes or cards the user 
enters a 2-digit Command, then specifies three or four data 
values: a user type, a location and a keypad-PIN, and/or 
card.  
 

These are the locations in the unit’s memory where Card 
and/or PIN User data is stored.  EntryProx User Locations 
are numbered 1 – 2000.  User Location 1 is reserved for the 
Master Code, used for programming – Do not enter cards 
or PINs for normal access into User Location 1. 

 

 
USER TYPES 

User Types determine what happens when a user presents 
their card/PIN to the reader.  A User Location can be 
programmed as one of four specific user types: 

  For this user-type, when the Card 

is presented (or PIN is entered) the door opens for an 
indefinite period, until the card / code is reentered or another 
toggle code is entered (this is useful for deliveries, for 
example).  

 

ormal access (1)   

This is the default user type, when the 

Card is presented (or PIN is entered) the door opens for the 
duration of the Main Relay time.   

 

  For this user-type, when the Card is 

presented (or PIN is entered) the door remains locked and 
the Transaction Log is “dumped” to an optional IR printer