Trimble Inc. CCKCDPD Benutzerhandbuch
CrossCheck CDPD Mobile Unit Manual 1 7
Installation 2
The integral mounting flange is designed to secure the
CrossCheck CDPD to a flat surface. The flange has four holes
for securing the unit with fasteners.
CrossCheck CDPD to a flat surface. The flange has four holes
for securing the unit with fasteners.
2.
Use self-tapping screws or machine screws to secure the unit to
the mounting surface.
the mounting surface.
,
Caution – Over-stressing the plastic mounting surface when
tightening the mounting screws can cause the plastic to crack. Use
washers sized small enough that they do not tighten down on the
plastic cover of the CrossCheck CDPD when the mounting screws are
secured. Tightening screws without using washers can lead to
compressing, cracking, or deforming the mounting surface.
tightening the mounting screws can cause the plastic to crack. Use
washers sized small enough that they do not tighten down on the
plastic cover of the CrossCheck CDPD when the mounting screws are
secured. Tightening screws without using washers can lead to
compressing, cracking, or deforming the mounting surface.
Figure 2.4 shows the mounting dimensions.
Figure 2.4
CrossCheck CDPD Mounting Dimensions (in millimeters)
4.8
205.5
69.9