3M Company LSD702 Benutzerhandbuch

 

       

11

 

Inserting the memory card  

The memory card contains the data and Handheld Software 
required for operation.  

1 - Install a pull tab on the memory 

card 

The handheld includes a number of pull 
tabs that you can attach to various memory 
cards. These pull tabs can make removing 
memory cards easier. 

 

For reliable operation, 3M recommends 
using only SanDisk memory cards and 
SanDisk memory-card readers. 

 
2 – Insert the memory card 

Grasp the memory card with the label 
side up. 

Push the pin-socket end of the memory 
card into the memory-card slot until it 
is completely inserted. 
§  Messages (such as loading the 

database, etc.) appear on the 
screen. 

§  If the memory card contains a 

newer version of 3M software, a 
dialog box will ask you if you want 
to install the new version. 

 

Above the memory-card slot is a 
Secure Digital (SD) card slot that is not 
used. A small plastic blank blocks the 
SD slot. If the blank becomes loose, 
push it back into place. 

Database Errors 

The handheld may display No Database or 
Invalid Database messages.  

§  These messages are usually the result 

of corrupted data on the memory card.  

§  If you see these messages, you may 

have to reformat the memory card (See 

 on page 

14.) 

Data corruption can occur if you remove 
the memory card from the memory-card 
drive before a Data Manager export 
operation is complete. You can also corrupt 
data if you do not return to the Home 
screen before you remove the memory 
card from the handheld. 

32

MB

702_007

78

-8

12

3-7

89

0-5

32

MB

78

-8

12

3-7

89

0-5

  

Pin-socket side of
the memory card

> The pin-socket end of 
the memory card facing 
the Handheld

> The label facing up.