3M Company LSD702 Benutzerhandbuch
13
Resetting the handheld
If the handheld display locks up or stops working, perform the reset
procedure described below.
procedure described below.
Symptoms may include:
§ The power will not come on (screen remains blank)
§ Lines appear on display or the display is distorted.
§ A blinking black square appears in the upper left corner of the display.
§ Palm startup screen appears on the display and will not go away.
§ The power will not come on (screen remains blank)
§ Lines appear on display or the display is distorted.
§ A blinking black square appears in the upper left corner of the display.
§ Palm startup screen appears on the display and will not go away.
A blank screen may be caused by a fully discharged battery.
To reset the handheld
1
Insert a memory card (with 3M Handheld Software
on it) into the handheld.
on it) into the handheld.
2
Press and hold the reset button for
approximately one second.
approximately one second.
3
Press the trigger.
a
Handheld Software loads.
b
The Home screen appears.
If pressing the reset button
did not work…
1
Insert a memory card (with 3M Handheld Software
on it) into the handheld.
on it) into the handheld.
2
Remove the battery for approximately five
minutes.
minutes.
3
Insert a fully charged battery.
4
Follow the
Using the Handheld Device for the
first time
procedure on page 10.
702_012
Reset
Button
Button
Figure 6: Handheld reset button.