Nihon Kohden Corporation ZM-930PA Benutzerhandbuch
Operator's Manual ZM-920PA/930PA
3
Panel Description
Top Panel
Refer to the warnings below
Refer to the symbol page
ECG/RESP socket
Connects to the electrode lead for measuring ECG
and/or respiration by the impedance method.
Connects to the electrode lead for measuring ECG
and/or respiration by the impedance method.
Refer to the warnings below
Refer to the symbol page
SpO
2
socket
Connects to the SpO
2
probe.
For attaching a strap
ZM-930PA only
WARNING
• Before defibrillation, check that the electrode leads and SpO
2
probe attached to the patient are properly connected to the
transmitter. Touching the metal parts of disconnected leads and
probes may cause electrical shock or injury by discharged energy.
transmitter. Touching the metal parts of disconnected leads and
probes may cause electrical shock or injury by discharged energy.
• When performing defibrillation, discharge as far as possible from
electrodes, patches and any gel, cream or medicine on the chest
of the patient. If there is a possibility that the defibrillator paddle
could touch these materials, remove them from the patient. If the
defibrillator paddle directly contacts these materials, the
discharged energy may cause skin burn to the patient.
of the patient. If there is a possibility that the defibrillator paddle
could touch these materials, remove them from the patient. If the
defibrillator paddle directly contacts these materials, the
discharged energy may cause skin burn to the patient.
• Before defibrillation, all persons must keep clear of the bed and
must not touch the patient or any equipment connected to the
patient. Failure to follow this warning may cause electrical shock
or injury.
patient. Failure to follow this warning may cause electrical shock
or injury.