Nihon Kohden Corporation ZM-930PA Benutzerhandbuch
22
Operator's Manual ZM-920PA/930PA
Connecting the Electrode Lead to the Transmitter
Connect the electrode lead to the ECG/RESP socket on the transmitter.
CAUTION
••••• Do not shake or swing the transmitter holding the leads or cables
connected to the transmitter. The transmitter may come off and
injure someone or damage surrounding instruments.
injure someone or damage surrounding instruments.
••••• Hold the connector of the electrode lead when connecting/
disconnecting the electrode lead. If you disconnect the electrode
lead by pulling the lead, it damages the electrode lead.
lead by pulling the lead, it damages the electrode lead.
Selecting the Electrode Position
Follow the physician’s instructions for electrode placement when available.
For ECG monitoring, electrodes are attached only on the chest to allow patient
movement and obtain continuous stable ECG. Following leads are examples.
When also monitoring respiration, refer to the “Electrode Position for Respiration
Monitoring” section.
For ECG monitoring, electrodes are attached only on the chest to allow patient
movement and obtain continuous stable ECG. Following leads are examples.
When also monitoring respiration, refer to the “Electrode Position for Respiration
Monitoring” section.
NOTE
The optimum electrode positions for ECG measurement of a patient
are not always optimum for respiration measurement of the patient.
Select positions suitable for both ECG and respiration
measurements, or positions which have priority for one
measurement.
are not always optimum for respiration measurement of the patient.
Select positions suitable for both ECG and respiration
measurements, or positions which have priority for one
measurement.