Nihon Kohden Corporation ZM-940PA Benutzerhandbuch
Operator's Manual ZM-940PA
75
2.
Remove one battery.
3.
While pressing the NIBP START/STOP and NIBP INTERVAL keys, install the battery.
The SETUP screen appears.
The SETUP screen appears.
4.
Press the NIBP INTERVAL key to move the cursor to “SYSTEM SETUP”.
5.
Press the NIBP START/STOP key to enter
the SYSTEM SETUP screen. The channel of
this transmitter is displayed.
the SYSTEM SETUP screen. The channel of
this transmitter is displayed.
6.
Check that the channel displayed on the LCD
matches the label on the transmitter.
matches the label on the transmitter.
Channel