HP 5185-3843 Benutzerhandbuch
Installing the Printer on a Network System or Server 4-5
5. When prompted, print a Jetdirect configuration page to verify printer setup. See page
If the page successfully prints, then you have completed printer setup on this computer
system. (If this system is a server, see “Client-Server Networks” below.)
system. (If this system is a server, see “Client-Server Networks” below.)
If the page fails to print, perform the troubleshooting tasks displayed by the wizard.
Click
Click
Help
for more information. In addition, you can select
Networking Help
from
the CD-ROM installation utility’s main screen.
For troubleshooting information, see chapter 5. For additional information, read the
Administrator’s Guide, HP Jetdirect Print Server (Models 610n/615n/680n/380x), on
the HP Jetdirect CD-ROM. For information on accessing documents on the Jetdirect CD-
ROM, refer to the section “To View Documents on the CD-ROM” on page 4-7.
Administrator’s Guide, HP Jetdirect Print Server (Models 610n/615n/680n/380x), on
the HP Jetdirect CD-ROM. For information on accessing documents on the Jetdirect CD-
ROM, refer to the section “To View Documents on the CD-ROM” on page 4-7.
Client-Server Networks
After you have set up the printer on the server, you will need to set up your network clients
to access the printer through the server. The procedures depend on the available utilities
for your particular clients and network operating system.
to access the printer through the server. The procedures depend on the available utilities
for your particular clients and network operating system.
For example, if the printer was installed and shared on a Microsoft server, each Windows
client can use Add Printer or Network Neighborhood utilities to access the printer.
client can use Add Printer or Network Neighborhood utilities to access the printer.
For more information, refer to the documentation and help supplied with your network
operating system.
operating system.