Texas Instruments AM18x eXperimenter's Kit TMDSEXP1808L TMDSEXP1808L Datenbogen
Produktcode
TMDSEXP1808L
A1
A1
DDR2/mDDR
Controller
DDR2/mDDR
Device
Region should encompass all DDR2/mDDR circuitry and varies
depending on placement. Non-DDR2/mDDR signals should not be
routed on the DDR signal layers within the DDR2/mDDR keep out
region. Non-DDR2/mDDR signals may be routed in the region
provided they are routed on layers separated from DDR2/mDDR
signal layers by a ground layer. No breaks should be allowed in the
reference ground layers in this region. In addition, the 1.8 V power
plane should cover the entire keep out region.
depending on placement. Non-DDR2/mDDR signals should not be
routed on the DDR signal layers within the DDR2/mDDR keep out
region. Non-DDR2/mDDR signals may be routed in the region
provided they are routed on layers separated from DDR2/mDDR
signal layers by a ground layer. No breaks should be allowed in the
reference ground layers in this region. In addition, the 1.8 V power
plane should cover the entire keep out region.
SPRS653E – FEBRUARY 2010 – REVISED MARCH 2014
6.11.3.5 DDR2/mDDR Keep Out Region
The region of the PCB used for the DDR2/mDDR circuitry must be isolated from other signals. The
DDR2/mDDR keep out region is defined for this purpose and is shown in
DDR2/mDDR keep out region is defined for this purpose and is shown in
. The size of this
region varies with the placement and DDR routing. Additional clearances required for the keep out region
are shown in
are shown in
.
Figure 6-19. DDR2/mDDR Keepout Region
Copyright © 2010–2014, Texas Instruments Incorporated
Peripheral Information and Electrical Specifications
115
Product Folder Links: