Embedded Artists GPS Receiver Board EA-ACC-023 EA-ACC-023 Datenbogen
Produktcode
EA-ACC-023
3
3
1
1
This document is the exclusive property of GlobalTop Tech Inc. and should not be distributed, reproduced, into any other format without
prior permission of GlobalTop Tech Inc. Specifications subject to change without prior notice.
Copyright © 2011 GlobalTop Technology Inc. All Rights Reserved.
FGPMMOPA6H Data Sheet
GlobalTop Technology
Ver. V0A
Document #
5.5 ESD Handling
Please carefully follow the following precautions to prevent severe damage to
GPS modules.
GlobalTop GPS modules are sensitive to electrostatic discharges, and thus are Electrostatic Sensitive
Devices (ESD). Careful handling of the GPS modules and in particular to its patch antenna (if included)
and RF_IN pin, must follow the standard ESD safety practices:
Unless there is a galvanic coupling between the local GND and the PCB GND, then the first
point of contact when handling the PCB shall always be between the local GND and PCB GND.
Before working with RF_IN pin, please make sure the GND is connected
When working with RF_IN pin, do not contact any charges capacitors or materials that can
easily develop or store charges such as patch antenna, coax cable, soldering iron.
Please do not touch the mounted patch antenna to prevent electrostatic discharge from the
RF input
When soldering RF_IN pin, please make sure to use an ESD safe soldering iron (tip).