Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 Datenbogen
Produktcode
6ED1057-3BA00-0AA8
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
330
Operating Instructions, 06/2014
⑤
Message area
You arrange the message text in this area. Information entered in this area corresponds with
You arrange the message text in this area. Information entered in this area corresponds with
that on the LOGO! onboard display.
⑥
Insert button
Button for inserting a selected block parameter into the message text.
Button for inserting a selected block parameter into the message text.
⑦
Block parameter area
Shows the parameters of a block selected from the block area which you can output in the
Shows the parameters of a block selected from the block area which you can output in the
message text.
⑧
General parameter area
Shows general parameters such as the current date.
Shows general parameters such as the current date.
To arrange the message text
1. From the "Block" area, select the block whose parameters you want to output.
2. Drag and drop the parameters required from the block parameters to the messages area.
2. Drag and drop the parameters required from the block parameters to the messages area.
You may also use the "Insert" button to do so.
3. In the messages area, you can add parameter data as required.
Simulation mode
5.3.6.6
Message text (LOGO! 0BA2 and LOGO! 0BA3)
The message text is only available for devices as of hardware series 0BA2.
Short description
Display of a configured message text in RUN mode.
Connection
Description
Input En
The message text is output with a 0 to 1 transition at input En (Enable).
Parameter P
P is the priority of the message text.
0 is the lowest, 9 the highest priority.
Parameter
Par: Parameter or actual value of another, already programmed function
(see "Displayable parameters or actual values")
Output Q
Q remains set as long as the message text is queued.