Schwinn 431 Handbuch
ASSE
mbl
y INS
tR
uct
IONS
12
Step 6 install Right and Left leg
parts:
• Right Leg (Ref R)
• Left Leg (Ref S)
• Right Leg (Ref R)
• Left Leg (Ref S)
tools:
• Supplied Combo Wrench
6-1 Attach the Right leg (Ref R), marked with an “R” sticker that can
be removed, to the post on the Crank (Ref C1) using one M8x20L
hex head thread lock (Ref 10) one M8 washer locking (Ref 5) and
one M8 washer wide (Ref 4).
• Supplied Combo Wrench
6-1 Attach the Right leg (Ref R), marked with an “R” sticker that can
be removed, to the post on the Crank (Ref C1) using one M8x20L
hex head thread lock (Ref 10) one M8 washer locking (Ref 5) and
one M8 washer wide (Ref 4).
6-2 Repeat the procedure for the Left Leg (Ref S) marked with an “L”
sticker that can be removed.
sticker that can be removed.
6-3 Place a Round Cover (Ref Y) over the head of each bolt.
NOtE: make sure the wheels on the legs are properly seated in
the Extrusion Assembies. If not, they legs may have been
reversed.
the Extrusion Assembies. If not, they legs may have been
reversed.
S
R
C1
Y
Y
10
5
4