Schwinn 431 Handbuch

ASSE

mbl

y INS

tR

uct

IONS

14

             

  parts: 
        • Foot Mount Plate Qty. 2 (Ref W)
        • Right Foot Assembly (Ref K)
        • Left Foot Assembly (Ref J)
        • Arm Cotter Pin (Ref AC)
tools:
       • Supplied Allen Wrench

            

8-1 Slide the shaft under the Left Foot Assembly into the Pivot  (Ref P1) on the

      Left Leg Assembly. Align a Foot Mount Plate (Ref W) with the Pivot and 

      Foot assembly and secure using one M8x20L button head (Ref 11),

      two M8x15L button head (Ref 1), three M8 washers locking (Ref 5) and

      three M8 washers regular (Ref 3).
8-2 Position the Left Foot Assembly (Ref J), marked with an “L”, in the 

      U bracket at the bottom of the Left Lower Handlebar (Ref N). Insert a 

      Cotter Pin (Ref AC) , from the inside, through the U bracket and Foot 

      Assembly and secure with one M8x20L button head (Ref 11) one 

      M8 washer regular (Ref 3) and one M8 washer locking (Ref 5).
      NOtE: 

      1. Make sure Key on Cotter Pin engages the Slot in the U bracket. (see detail).

      2. Make sure the M8x20 bolt (Ref 10) stays concentric with Cotter Pin (Ref N), and  

 

 then use tool to tighten the bolt (Ref 10).

8-3 Repeat the procedure for the Right Foot Assembly (Ref K) marked

       with an “R”.