Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Trane
  4. Modular 20 to 35 Tons
  5. Entwickleranleitung

Trane Modular 20 to 35 Tons Entwickleranleitung

Download
Seite von 52
Programming Status
20
 PKG-SVP01D-EN
Temp Measured By Sensor Connected To
WSM ENT WATER TEMP INPUT
60.1 F
Used With: On water-cooled units only.
1.
Press the NEXT key until the following screen is displayed.
Temp Measured By Sensor Connected To
WSM MIXED AIR TEMP INPUT
51.7 F 
Used With: On water-cooled units only.
1.
Press the NEXT key until the following screen is displayed.(if applicable)
Temp Measured By Sensor Connected To
WSM ENT COND WATER TEMP INPUT
64.9 F
Used With: On water-cooled units only.
1.
Press the NEXT key until the following screen is displayed. (if applicable)
Temp Measured By Sensor Connected To
VCM MODULE AUX TEMP INPUT 
50.0 F
Used With: Units with a VCM installed and O/A 
preheater enabled.
1.
Press the NEXT key until the following screen is displayed. 
Compressor Module Ckt 1
Evap Temp 75.0
Sat Cond Temp 
81.0 F
1.
Pressing the NEXT key will scroll forward through the screens.
Compressor Module Ckt 2
Evap Temp 72.0
Sat Cond Temp 
87.0 F
1.
Pressing the NEXT key will scroll forward through the screens.
Compressor Module Ckt 3
Used With: SCWF/SIWF 42-80 tons or SCRF/SIRF 
50-60 tons only.
Evap Temp 72.0
Sat Cond Temp 
87.0 F
1.
Pressing the NEXT key will scroll forward through the screens.
Compressor Module Ckt 4
Used With: SCWF/SIWF 65-80 tons. 
Evap Temp 72.0
Sat Cond Temp 
87.0 F
End of Submenu (NEXT) to Enter SETUP
1.
Press the NEXT key until the following screen is displayed. 
Misc Input Status Submenu
Press ENTER to View Data in This Submenu 
1.
Press the NEXT key until the following screen is displayed. (if applicable)
RTM Supply Airflow Proving Inut:
FLOW
Possible Values:  Flow, No Flow
1.
Press the NEXT key until the following screen is displayed. 
RTM Remote Min Position Pot Input
0%
Used With:  Units when minimum position pot is 
assigned to function.
Possible Values:  0-100%
1.
Press the NEXT key until the following screen is displayed. (if applicable)
RTM Supply Air Pressure Input
2.1 IWC
Used With:  Units with IGV or VFD, or units without 
IGV or VFD and supply air pressure is present.
1.
Press the NEXT key until the following screen is displayed.