Trane Modular 20 to 35 Tons Entwickleranleitung
Programming Status
PKG-SVP01D-EN
21
Active Outside Air Humidity
30%
Used With: Units with an airside economizer only
1.
Press the NEXT key until the following screen is displayed. (if applicable)
Active Outside Air Humidity
ECEM Return Air Humidity
ECEM Return Air Humidity
30%
62%
62%
Used With: Units with an airside economizer and
comparative enthalpy only.
Possible Values: 0-100%
comparative enthalpy only.
Possible Values: 0-100%
1.
Press the NEXT key until the following screen is displayed.
VCM Outside Air Flow Input
350.0 CCFM
Used With: Units with VCM.
Possible Values: 0 to max unit airflow
Possible Values: 0 to max unit airflow
1.
Press the NEXT key until the following screen is displayed.
VCM CO
2
Level Input
1512 PPM
Used With: Units with VCM installed and CO
2
reset
enabled.
Possible Values: 0-2000 PPM
Possible Values: 0-2000 PPM
1.
Press the NEXT key until the following screen is displayed.
WSM Water Flow Switch Input
Flow
Used With: Water-cooled units with a water flow
switch installed.
Possible Values: Flow, No Flow
switch installed.
Possible Values: Flow, No Flow
1.
Press the NEXT key until the following screen is displayed. (if applicable)
End of Submenu (NEXT) to Enter SETUP
1.
Press the NEXT key until the following screen is displayed.
GBAS 0-5VDC Module Staus Submenu
Press ENTER to View Data in This Submenu
Press ENTER to View Data in This Submenu
Used With: Units with GBAS module
1.
Press the NEXT key until the following screen is displayed.
GBAS (0-5VDC)
Module Input 1 0.00 VDC
Used With: Units with GBAS module.
Possible Values: The inputs 1,2,3 and 4 may be
assigned to: Occ Zone Cooling Setpoint, Occ Zone
Heating Setpoint , Unocc Zone Cooling Setpoint,
Unocc Zone Heating Setpoint, Space Static Pressure
Setpoint, Supply Air Static Pressure Setpoint, Min O/
A Flow Setpoint, Not Assigned
Possible Values: The inputs 1,2,3 and 4 may be
assigned to: Occ Zone Cooling Setpoint, Occ Zone
Heating Setpoint , Unocc Zone Cooling Setpoint,
Unocc Zone Heating Setpoint, Space Static Pressure
Setpoint, Supply Air Static Pressure Setpoint, Min O/
A Flow Setpoint, Not Assigned
Assignment: Not
Assigned
1.
Press the NEXT key to display GBAS 0-5 VDC inputs 2, 3, and 4.
2.
Press the NEXT key until the following screen is displayed.
GBAS (0-5VDC) Demand Limit Input Status
Used With: Units with GBAS module.
Possible Values: Open, Closed
Possible Values: Open, Closed
OPEN
1.
Press the NEXT key until the following screen is displayed. (if applicable)
GBAS (0-5VDC) Module Relay Output Status
Used With: Units with GBAS module.
Possible Values: Open, Closed
Possible Values: Open, Closed
Output 1
OFF
End of Submenu (NEXT) to Enter SETUP
1.
Press the NEXT key to leave the submenu and show following screen.