Panasonic Attune II Bedienungsanleitung

Specification

• Speaker
Sound pressure level:

90 dB (1 W, 1 m {3.28 feet}, Typical)

Impedance: 8

Frequency response:

250 Hz to 15000 Hz (–10dB, Typical)

Power capacity:

5 W (RMS*

)

• Microphone
Sensitivity:

–52 dB (0 dB=1 V/Pa, 1 kHz, Typical)

Frequency response:

100 Hz - 6000 Hz (–10 dB, Typical)

• Miscellaneous
Input/Output:

Stranded cables, connector is attached to the end.

Cables

Approximately 2700 mm {106-5/16

inches} two core shielded wire

Inner sheath color: Red: +

Black: –
Gray: GND

Connector

Euro type 3P connector

Operating temperature:

–20 °C to +50 °C {–4 °F to 122 °F}

Dimensions:

114 mm x 114 mm x 70 mm
{4-1/2 inches (W) x 4-1/2 inches (H) x 2-3/4 inches (D)}

(Excluding

projections)

Weight:

Approximately 1.0 k

g {2.2 lbs.} (without bracket)

Approximately 1.2 k

g {2.6 lbs.} (with brackets)

Finish: Plastic-molded,

black

*1 Rated noise power specified by IEC60268-5:2003+A1:2007(E), International Electrotechnical

Commission (IEC).

Dimensions and weight indicated are approximate.
Specifications are subject to change without notice.

Standard accessories

Operating Instructions (this document) ............................................................................ 1 pc.

Bracket ......................................................................................................................... 2 pcs.
Screw for installation (M5 × 15) ..................................................................................... 2 pcs.
Wind screen ................................................................................................................... 1 pc.
Gaskets for front panel and bracket ................................................................................ 1 set
Foam1, Foam2 for installation ..................................... Provided as part of packaging material
Plug connector for installation
(Already inserted into the socket connector of the main unit) ........................................ 1 pc.