Hoshizaki MODULAR CRESCENT CUBER SERENITY SERIES KMS-1400MLH Benutzerhandbuch

50

1) Turn off the power supply.
) Remove the panels.
3) Drain the water tank by removing the 

insulation panel, front frame and suction 
hose. (See Fig. 3.)

4) Disconnect the pump suction and 

discharge hoses.

5) Unplug the water pump connector.
6) Remove the screws and pump motor 

bracket.

7) Remove the pump housing and check the impeller.
8) If the impeller is defective, install a new impeller.
9) Install the new motor or new parts, and replace the removed parts in the reverse order 

of which they were removed.

10) Turn on the power supply and check for leaks.
11) Replace the panels in their correct positions.

1) Turn off the power supply.
) Close the water supply line shut-off valve.
3) Open the water supply line drain valve and let the water supply line drain.
4) Remove the panels.
5) Remove the valve outlet tubing and fitting nut.
6) Disconnect the terminals from the water valve. 
7) Remove the bracket and water valve from the unit.
8) Install the new water valve and replace the removed parts in the reverse order of which 

they were removed.

9) Close the water supply line drain valve.

10) Open the water supply line shut-off valve.
11) Turn on the power supply and check for leaks.
1) Replace the panels in their correct positions.

Thumbscrew

Front Frame

Suction Hose