Aruba Networks Access Point Aruba AP 60/61 Benutzerhandbuch

31

Installation Guide

This appendix discusses troubleshooting tools and procedures available for the 
Aruba AP 60/61. Troubleshooting should be limited to the information provided 
below. 

After provisioning and deployment, the Aruba AP 60/61 can be configured and 
managed through the Mobility Controller. However, the Aruba AP 60/61 includes 
built-in troubleshooting features for situations where the Mobility Controller 
commands are unable to diagnose AP problems.

This appendix describes using the built-in AP support prompt for troubleshooting.

Depending on your network topology, the built-in AP Support prompt can be 
accessed using the AP serial console port or through the Mobility Controller using 
the Serial Over Ethernet (SOE) interface or using Telnet from a remote 
management station.

This method requires that the Aruba AP 60/61 is connected directly to an 
SPOE-compatible network port on the Mobility Controller (see 

 on 

).

Telnet to the Mobility Controller Serial-Over-Ethernet (SOE) interface.

This AP contains no user accessible components. Do not 
attempt to disassemble the Aruba AP 60/61. If this AP 
does not operate properly, contact Aruba Technical 
Support (contact information is contained in 

). No maintenance (beyond keeping the 

AP clean and dust free) is required. To clean the Aruba AP 
60/61, use a static-free, dry cloth.