ArtDio IPE 1000 Benutzerhandbuch

 

 26

 

Step 1: Take the handset off the phone 

Step 2: Dial the PROG Access Code after hearing the dial tone (default is ##) 

Step 3: Enter the Password (default is 0000) 

Step 4: Enter code "02". 

Step 5: Enter the IP address as "203","*","79","*","238","*","144" and "#" as the ending 

prompt. You will then hear the confirmation tone. 

Step 6: Enter code "03" to begin the subnet mask configuration. 

Step 7: Enter the subnet mask as "255", "*", "255", "*", "255", "*", "128" and "#" as 

the ending prompt. You will then hear the confirmation tone. 

Step 8: Enter code "04" to begin configuring the IP address for the default gateway. 

Step 9: Enter the IP address of the default gateway as "203", "*", "79", "*", "238", "*", 

"186" 

and "#" as the ending prompt. You will then hear the confirmation tone. 

 

Step 10: Enter code "98" then press "1" and "#" as the ending prompt. You will then hear the 

confirmation tone, and the system will restart automatically. 

 

Place the handset on the phone to end your configuration session. 

 

 

 

Step 1: Enter Privileged Mode 

 

PBX GATEWAY>enable 

Password: ****** 

PBX GATEWAY# 

 

Step 2: Enter Configuration Mode 

 

PBX GATEWAY#configure 

Enter configuration commands, one per line.  End with CTRL/Z