DSCover Satellite Products Home Security System SCW904x Benutzerhandbuch

Self Contained Wireless Alarm System v1.0

Section 6: Advanced Programming

This section provides the information necessary to program all required features for a basic system as well as common applications.

6.1 How to Program:

DSC recommends filling in the Programming Worksheet with the required programming information before programming the system. This will
reduce the time required to program and will help eliminate errors.

To enter Installer Programming press [ ][8][Installer Code]. The LCD keypad will display ‘Enter Section’. An error tone indicates the installer

code entered is incorrect. Press [#] to clear any key presses and try again.

The Armed and Ready lights indicate programming status:

Armed Light ON

Panel waiting for 3-digit section number

Ready Light ON

Panel waiting for data to be entered

Ready Light FLASHING

Panel waiting for HEX data to be entered

6.2 Programming Toggle Options:

Enter the 3-digit programming section number

•

The Armed light will turn OFF and the Ready light will turn ON.

•

The keypad will display which toggle options are ON or OFF according to the chart.

•

To toggle an option ON or OFF, press the corresponding number on the keypad. The display will change accordingly.

•

When all the toggle options are configured correctly, press the [#] key to exit the program section.

•

The Ready light will turn OFF, the Armed light will turn ON and the LCD will display “Enter Section”.

6.3 Programming Decimal and Hexadecimal (HEX) Data:

•

Enter the 3-digit programming section number.

•

The Armed light will turn OFF and The Ready light will turn ON.

•

Enter the data written in the boxes.

For sections that require multiple 2 or 3 digit numbers, the keypad will double-beep after each 2 or 3 digit entry and move to the next item in the
list. After the last digit in the section is entered, the keypad will beep rapidly 5 times and exit the program section. The Ready light will turn OFF,
the Armed light will turn ON and the LCD will display “Enter Section”.

For sections that do not require data for every box (such as phone numbers) press the [#] key to exit the program section after entering all the
required data. The Ready light will turn OFF, the Armed light will turn ON and the LCD will display “Enter Section”.
At any time the [#] can be pressed to exit any program section. All changes made up to that point will be saved.

6.4 How to Exit Installer Programming:

To exit installer programming, press the [#] key when the panel is waiting for a 3-digit section number (the Armed light is ON). The LCD will
display the user menu.

6.5 Viewing Programming

The keypad will immediately display all the information programmed when a programming section is entered. Use the arrow keys (< >) to scroll
through the data being displayed. Scroll past the end of the data displayed, or press the [#] key to exit the section.

The default Installer Code is [5555] .

You cannot enter installer programming while the system is armed or in alarm.

Option ON

Option OFF

# Displayed

Dash [-] Displayed

In addition to the standard digits 0-9, HEX digits and special dialer functions can also be programmed.

Value

Enter

Telephone Dialer

To enter a HEX digit, press the [ ] key to begin HEX programming. The Ready light
will FLASH. Press the number corresponding to the HEX digit required. The Ready
light will continue to FLASH. Press [ ] again to return to normal decimal program-
ming. The Ready light will turn ON.

HEX [A]
HEX [B]
HEX [C]
HEX [D]
HEX [E]
HEX [F]

Press [ ][1][ ]
Press [ ][2][ ]
Press [ ][3][ ]
Press [ ][4][ ]
Press [ ][5][ ]
Press [ ][6][ ]

Not Supported
Simulated [ ] key
Simulated [#] key
Dial tone search
Two second pause
Not Supported