Bacharach GDA-1600 Benutzeranleitung

Seite von 54
Instruction 5700-9001 
 
GDA-1600 16-Channel Controller 
45 
8  Adding the Wireless Radio Kit Option 
8.1  Introduction 
The  GDA-1600  slave  serial port  may be connected to a FHSS (Frequency Hopping 
Spread Spectrum) wireless radio modem shown in Figure 8.1.  There are two different 
frequency options offered: 
  900 MHz (single-port modem option or dual-port modem option) 
  2.4 GHz (single-port modem option or dual-port modem option). 
 
 
2.4 GHz Radio Modem Note: 
5700-0034 Has One Radio Module Installed 
5700-0035 Has Two Radio Modules Installed
 
900 MHz Radio Modem Note: 
5700-0036 Has One Radio Module Installed 
5700-0037 Has Two Radio Modules Installed
 
Figure 8.1 
The dual port radio modems have two radio modules installed and can be used to receive 
and transmit data simultaneously.  The radio kit options allow three separate modes of 
wireless operation.  These are: 
  “Wireless Receiver” accepting data from GDX-350 RF sensor transmitters 
  “Wireless Modbus Slave”  providing data to a Modbus  master  (master  side of 
network requires additional
  “Wireless Modbus Master” accepting wireless data from Modbus slaves (slaves 
side of network requires 
 radio) 
additional
“Wireless Receiver” and “Wireless Modbus Master”  modes require the radio be 
connected to the GDA-1600’s RS-485 master port and “Wireless Modbus Slave” mode 
 radio).