Barco Projector 26-0313000-00 Benutzerhandbuch

Touch Screen Calibration

Encore system setup:  Step 4.

The calibration procedure is an excellent starting point prior to setup.  

S

— Ensure that you are familiar with the LCD Settings Menu.  In 

Chapter 5, refer to the “

” section on page 203.

„

Use the following steps to calibrate your Touch Screen display(s):

In the System Keypad, press MISC to display the Miscellaneous Menu.

Press {LCD SETTINGS} to display the LCD Settings Menu.

Press {LCD CAL} to display the Touch Screen Calibration Menu.  

(Controller LC only)  On the top LCD line, select the LCD touchscreen that you 
want to calibrate. 

Follow the directions on the menu to complete the calibration procedure. 

(Controller LC only)  Repeat steps 1 through 5 for the other LCD touchscreen.

For both Controllers, use the controls on the LCD Settings Menu to adjust 
brightness and contrast as desired.

4