Barco Projector 26-0313000-00 Benutzerhandbuch
Encore Presentation System • User’s Guide • Rev 04
269
6. System Setup
Restore from Flash Memory Card
oÉëíçêÉ=Ñêçã=cä~ëÜ=jÉãçêó=`~êÇ
Encore system setup: Step 6 (optional)
In this procedure, you will restore your system configuration from flash memory — provided
that you previously backed up your system to the flash memory card.
that you previously backed up your system to the flash memory card.
S
Prerequisite
— Ensure that you are familiar with the Backup/Restore
Menu
page 206 for details.
Use the following steps to restore your system from the flash memory card:
1.
Ensure that your flash memory card is properly inserted in the Controller’s
MEMORY CARD
MEMORY CARD
slot.
2.
In the System Keypad, press MISC to access the Miscellaneous Menu.
3.
Press
{
BACKUP RESTORE
}
to display the Backup/Restore Menu.
4.
Press {CHECK CARD} to display the Current Backup Menu.
~
Check the “Controller files backed up” section to confirm the types of
files present on the Flash Memory Card (e.g., System, Presets,
ScreenPRO-II).
files present on the Flash Memory Card (e.g., System, Presets,
ScreenPRO-II).
~
Check the “VP/SPs backed up” section to confirm the IDs of the
processors that are backed up.
processors that are backed up.
~
Press {BACK} to return to the Backup/Restore Menu.
5.
On the Device line, select Ctrlr+VP+SP to perform a complete “restore.”
6.
On the Controller Options line, select All.
7.
On the VP/SP to Restore line, select All.
8.
Press {RESTORE} to restore the selected system configuration.
At the conclusion of this procedure, your system is completely set up — exactly the way
that you left it when you performed a complete system “backup.” No further setup
operations are required.
that you left it when you performed a complete system “backup.” No further setup
operations are required.
Please continue with system operations. Refer to the “
for details.
6