Bil-Jax Wheelchair XLB-4232 DC Benutzerhandbuch
XLB-4232 DC
1-4
1-3 DURING OPERATION
Ensure the following general safety precautions are followed during the operation of the
XLB-4232 DC Boom Lift.
XLB-4232 DC Boom Lift.
DANGER
This machine is not insulated for use near electrical power lines and DOES NOT
provide protection from contact with or close proximity to any electrically charged
conductor. Operator must maintain safe clearances at all times (10 feet minimum)
and always allow for platform movement such as wind induced sway. Always
contact the power company before performing work near power lines. Assume
every line is hot. Remember, power lines can be blown by the wind.
provide protection from contact with or close proximity to any electrically charged
conductor. Operator must maintain safe clearances at all times (10 feet minimum)
and always allow for platform movement such as wind induced sway. Always
contact the power company before performing work near power lines. Assume
every line is hot. Remember, power lines can be blown by the wind.
Refer to Table 1-1 for minimum safe approach distances between machine and electrical
power lines.
power lines.
Table 1-1. Minimum Safe Approach Distances
Minimum Safe Approach Distance
Voltage Range
(Phase to Phase)
(Feet) (Meters)
0 to 300V
Avoid Contact
Over 300V to 50KV
10
3.05
Over 50KV to 200KV
15
4.60
Over 200KV to 350KV
20
6.10
Over 350KV to 500KV
25
7.62
Over 500KV to 750KV
35
10.67
Over 750KV to 1000KV
45
13.72
•
ALWAYS position lift far enough away from power sources to ensure that no
part of the lift can accidentally reach into an unsafe area. This includes full
extension of the boom through 360 degrees rotation.
extension of the boom through 360 degrees rotation.
•
ALWAYS operate only on a firm and level surface. NEVER use on surfaces that
do not support the equipment with its rated load capacity and the resulting force
exerted on the outriggers during boom extension and rotation.
exerted on the outriggers during boom extension and rotation.
•
ALWAYS keep yourself and all personnel away from potential pinch or shear
points.
•
ALWAYS report any misuse of equipment to the proper authorities. Horseplay is
prohibited.
•
ALWAYS maintain good footing on the work platform. NEVER wear slippery
soled shoes.
•
ALWAYS make certain all personnel are clear and there are no obstructions
before repositioning basket.
•
ALWAYS cordon off area around the outriggers to keep personnel and other
equipment away from it while in use.
•
ALWAYS stay clear of wires, cables, and other overhead obstructions.
•
ALWAYS engage the boom travel locking pin before towing the trailer.