Vacmaster Vacuum Cleaner VHB307WM Benutzerhandbuch

 
 

9 

 

 
 
 
 
 
 
 
 
 
 
This Wet/Dry Vac has blowing capabilities only when the hose is inserted into the blowing port.  To use the 
blower feature follow the instructions listed. 
 

 
1.  Verify that the power cord is disconnected from the outlet.  (fig.1) 
2.  Make sure the collection tank is empty before using as a blower. 
3.  Remove hose from the vacuum port. 

4.  Insert the larger end of the hose into the blowing port on the backside of the power head and push in 

tightly.  (fig. 2) 

5.  Fit the desired attachment to the hose.  (fig. 3) 
6.  Ensure the power switch is turned to the ‘O” OFF position and plug into the power supply.  (fig. 4) 
7.  Before turning on the vac, firmly hold loose end of the hose.  Turn the motor on by flipping the switch to  

the ‘I’ ON position.  (fig. 5) 

 

 
 
 
 
 
 
 
 

 
 
1. Verify that the power cord is disconnected from the outlet.  (fig.1) 
2. Disconnect the hose from the vacuum. (fig.2) 
3. Undo the latches and remove the power head from the collection tank.  (fig. 3) 
4. Clear all dirt or debris from the collection tank and hose.  (fig.4) 
5. Clean or replace the filters.  (fig.5)  
6. Check the hose, attachments, and power cord to verify that they have not been damaged. 
 

Clean or change the dust filter regularly for best performance. ALWAYS USE DUST 

FILTER FOR DRY VACUUMING.  If the machine is used with out the dust filter, the motor will burn out and 
the warranty will be voided.  Always keep spare filters on-hand.